Installation Guides

Installation Guides

Detailed install guides for all Summit Seeker products. Two people and basic hand tools are all you need.

Rooftop Tent — Install Overview

1. Measure your crossbar spread — centre-to-centre. 1.3 Compact: under 1350mm. 1.4 Standard: 1400–1550mm.
2. Mount to rack bars — supplied T-slot clamps bolt to most aftermarket racks. Round and square bar adaptors included. Two people recommended (~38kg). 10mm ratchet and torque wrench required (35Nm on mount bolts). No drilling.
3. Solar connection — Anderson plug is pre-wired. Route your panel cable through the cable port and clip in. No splicing, no additional wiring.
4. First open — unclip two latches, gas struts lift the lid, unfold ladder, lock. Under 60 seconds.

Awning — Install Overview

1. Mount awning brackets to your roof rack or side rails using supplied hardware.
2. Attach awning body to brackets. Two people recommended for 270° XL.
3. Connect support poles (included) to awning arms.
4. Test open/close before first trip.

Need Help?

Email summitseekeroffroad@gmail.com with your vehicle and rack setup and we’ll walk you through it.